Multiplication Tables Kit
Kit Number: 7519
Featuring multiplication tables for both 1 to 10 and 1 to 12, use the table that fits your needs. Strips alone can be used to practice skip counting and review multiples. Pair two strips with the fraction bar to explore a greater understanding of the relationship between multiplication, division, and equivalent fractions.
12x12 Multiplication Table Requires Minimum Build Volume: (Parts 4, 5, and 6)
X: 135mm Y: 135mm Z (height): 7mm
10x10 Multiplication Table Requires Minimum Build Volume: (Parts 1, 2, and 3)
X: 115mm Y: 115mm Z: 7mm
Total Estimated Print Time*:
10 hrs
*Print times calculated on Dremel 3D40s and will vary between brands and models of printers. To see an accurate print time for your machine, wait until the build starts printing and then look at "Time Left" in the information box.
Volume Geometry Kit
Portions of a Whole Kit
Number and Operator Coins Kit
Touch Numbers Kit
Binary Conversion Kit
Pizza Fractions Kit
WARNING!
3DPrinterOS printer streaming
Extruder Temp: 237/235C
Heatbed Temp: 100/20h
Time left:
Time Spent:
Non Printed Parts Needed to Complete this kit:
Suggested Filament Type:
Suggested Color:
  Non Printed Parts Needed to Complete this kit

Please click on the CONTINUE button if you would like to print the kit. Your account will be deducted the points shown above.
If you do not want to print the kit, please click the CLOSE button, and no points will be deducted from your account.