Kit Number: 6926
Let STEM learning take off with these gliders! Useful for a variety of explorations, let students investigate aeronautic variables, explore vectors, and use their knowledge to accomplish specific tasks. The perfect way to get outside when studying the distance formula or Pythagorean Theorem. Each plane is equipped with built-in flight control surfaces including elevators and wing flaps. Compare design with our variant plane which includes ailerons. Gliders require no assembly and are available in two sizes to accommodate various print bed sizes. Use with our Clinometer Kit to measure elevation gained and launch angle.
Note: The large gliders may be too large to print on the smallest printers.
Print these in bright colors to make it easier to spot in the air and on the ground.
Use only outdoors on a soft surface like grass! Be sure to never aim gliders at another person. Use full safety precautions while using this kit.
Large Build Volume Prints Require Minimum Build Volume:
X: 161mm Y: 127mm Z (height): 26mm
Small Build Volume Prints Require Minimum Build Volume:
X: 130mm Y: 102mm Z: 21mm
Total Estimated Print Time*:
*Print times calculated on Dremel 3D40s and will vary between brands and models of printers. To see an accurate print time for your machine, wait until the build starts printing and then look at "Time Left" in the information box.