Extended New York Balance Kit
Kit Number: 6667
Extending the function of the New York Balance, this kit allows for exploration of even more simple machines, additional applications of physics principles, and proportional reasoning. Includes parts to investigate type 2 levers.
Large Build Volume Prints Require Minimum Build Volume:
X: 134mm Y: 96mm Z (height): 65mm
Small Build Volume Prints Require Minimum Build Volume:
X: 111mm Y: 92mm Z: 65mm
Total Estimated Print Time*:
*Print times calculated on Dremel 3D40s and will vary between brands and models of printers. To see an accurate print time for your machine, wait until the build starts printing and then look at "Time Left" in the information box.
60 Degree Pencil Corner 000-P60-0515 Qty : 6
Closed Hold for Meter Stick Attachments 000-MWH-0215 Qty : 2
Hook Weight Small 000-WG4-0915 Qty : 7
New York Balance Kit - Fulcrum NYB-FLC-0215 Qty : 1
New York Balance Kit - Fulcrum Hold NYB-FHD-0215 Qty : 1
New York Balance Kit - Weight Hold NYB-WHD-0215 Qty : 3
S-Hook 000-SHK-0215 Qty : 2
Upright Meter Stick Hold Base 000-M3S-0515 Qty : 2
Upright Meter Stick Hold Pencil Supporter 000-M3P-0515 Qty : 2
3DPrinterOS printer streaming
Extruder Temp: 237/235C
Heatbed Temp: 100/20h
Non Printed Parts Needed to Complete this kit:
Suggested Filament Type:
- - Non Printed Parts Needed to Complete this kit
Please click on the CONTINUE button if you would like to print the kit. Your account will be deducted the points shown above.
If you do not want to print the kit, please click the CLOSE button, and no points will be deducted from your account.