Kit Number: 7293
Geography and Earth Science meet with this integrated kit. Featuring each of the seven continents 1cm in height with shorter bridges connecting the islands to the main landforms, use this for explorations of ocean currents. Simply fill a container with a bit of water and some oregano, place the continents into the water in proper geographic location, and add a “wind effect” to see how the shape of the continents affects ocean currents.
Large Build Volume Prints Require Minimum Build Volume:
X: 162mm Y: 110mm Z (height): 10mm
Small Build Volume Prints Require Minimum Build Volume:
X: 106mm Y: 99mm Z: 10mm
Total Estimated Print Time*:
*Print times calculated on Dremel 3D40s and will vary between brands and models of printers. To see an accurate print time for your machine, wait until the build starts printing and then look at "Time Left" in the information box.
Continents Kit - Africa CNT-AFR-0416 Qty : 1
Continents Kit - Antarctica CNT-ANT-0416 Qty : 1
Continents Kit - Asia CNT-ASA-0416 Qty : 1
Continents Kit - Australia CNT-AUS-0416 Qty : 1
Continents Kit - Europe CNT-EUR-0416 Qty : 1
Continents Kit - North America CNT-NAM-0416 Qty : 1
Continents Kit - South America CNT-SAM-0416 Qty : 1
3DPrinterOS printer streaming
Extruder Temp: 237/235C
Heatbed Temp: 100/20h
Non Printed Parts Needed to Complete this kit:
Suggested Filament Type:
- - Non Printed Parts Needed to Complete this kit
Please click on the CONTINUE button if you would like to print the kit. Your account will be deducted the points shown above.
If you do not want to print the kit, please click the CLOSE button, and no points will be deducted from your account.