Planetary Temperatures Kit
Kit Number: 6888
This multi-use kit features attachments for setting up a variety of experiments related to planetary temperatures. Use the markings on the meter sticks to record distance from an artificial sun and add bottles to simulate the effect of an atmosphere.
Requires Minimum Build Volume:
X: 113mm Y: 112mm Z (height): 49mm
Total Estimated Print Time*:
*Print times calculated on Dremel 3D40s and will vary between brands and models of printers. To see an accurate print time for your machine, wait until the build starts printing and then look at "Time Left" in the information box.
60 Degree Pencil Corner 000-P60-0515 Qty : 6
Parallel Meter Stick Holder 000-PLM-0416 Qty : 2
Planetary Temperatures Kit - Lid PTM-LID-0416 Qty : 3
Planetary Temperatures Kit - Thermometer Bulb Cover PTM-THB-0416 Qty : 3
Planetary Temperatures Kit - Thermometer Holder PTM-THH-0416 Qty : 2
Planetary Temperatures Kit - Thermometer Holder Center PTM-THC-0416 Qty : 1
Planetary Temperatures Kit - Thermometer Lid Ring PTM-LDR-0416 Qty : 3
Planetary Temperatures Kit - Thermometer Ring PTM-THR-0416 Qty : 3
Upright Meter Stick Hold Base 000-M3S-0515 Qty : 2
Upright Meter Stick Hold Pencil Supporter 000-M3P-0515 Qty : 2
3DPrinterOS printer streaming
Extruder Temp: 237/235C
Heatbed Temp: 100/20h
Non Printed Parts Needed to Complete this kit:
Suggested Filament Type:
- - Non Printed Parts Needed to Complete this kit
Please click on the CONTINUE button if you would like to print the kit. Your account will be deducted the points shown above.
If you do not want to print the kit, please click the CLOSE button, and no points will be deducted from your account.